Product Name : FC Female to FC Male Plug-in Fixed Fiber Attenuator
Operating Bandwidth : SM 1310/1550nm; MM 850nm
Return Loss : SM UPC≥50dB,APC≥60dB; MM PC≥35dB
Attenuation Tolerance : 1~5db±0.5db &6~25db±10%
Max Optical Input Power : 200mw
Operating Temp : -40°C to +85°C
Fiber Attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in singlemode long-haul applications to prevent optical overload at the receiver. fiber attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications. Though its applications range widely, fixed attenuators are most commonly used for test and measurement, optical sensors, and telecommunications applications.
Female to male Fixed fiber attenuators from OMC offer defined control of optical signals in both integrated and add-on products. Depending on the project or need, fixed attenuators can limit (attenuate) the amount of light passing through to the exact levels your project or application requirement. These precise attenuation levels provide for highly accurate performance.
OMC’s FC Female to FC male Fixed fiber attenuator are available for SM UPC (1-25dB) and SM APC (1-25dB).
FC(F) to FC(M) Fixed Fiber Attenuator Specifications:
Items |
Parameters |
|
Operating Bandwidth: |
SM |
MM |
1310/1550nm (1200nm-1600nm) |
850nm |
|
Return Loss |
UPC≥50db, APC≥60db |
PC≥35db |
Attenuation Tolerance |
1~5db±0.5db &6~25db±10% |
|
Vibration |
10~55hz(2hr) |
|
Max Optical Input Power |
200mw |
|
Operating temp |
- 40°C to +85°C |
FC Female to Male Fixed Fiber Attenuator Drawing:
Products Materials:
Parts name |
Material |
Connected body |
C3604 |
Locking Body |
Zine-Ally |
Sleeve |
High precision Ceramic sleeve |
Sleeve Subassembly |
Ceramic&SUS304 |
Inside hook |
PBT/PEI |
Abutment Screw |
C3604 |
Spring |
SUS304 |
Dust Cover |
PVC |
Features:
Fiber Attenuator Application:
Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single- mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications
Packaging:
This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as de- fault .Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty . Packing can be customized.