Product Name : ST Female to ST Female Plug-in Fixed Fiber Attenuator
Fiber Connector : ST
Connector Gender ; Fixed Female to Female
Return Loss : ≥55dB
Attenuation : 1~20dB
Polarization Dependent Loss : ≤0.2dB
Max Optical Input Power : 200mw
Operating Temp : -40~80°C
Leave a message to let us serve you better
Female to female Fixed fiber attenuators from OMC offer defined control of optical signals in both integrated and add-on products.
Depending on the project or need, fixed fiber attenuators can limit (attenuate) the amount of light passing through to the exact levels your project or application requirement. These precise attenuation levels provide for highly accurate performance.
OMC’s ST Female to ST female Fixed fiber attenuator are available for SM UPC (1-20dB) and SM APC (1-20dB).
ST to ST Female Fixed Fiber Attenuator Specifications:
Fiber Connector |
ST |
Sleeve Type |
Zirconia Ceramic |
Connector Gender |
Fixed Female to Female |
Transfer Mode |
Single mode |
Attenuation |
1~20dB |
Operating Wavelength(nm) |
1260~1620(SM) |
Attenuation Accuracy |
1-9dB ±0.5, 10-20dB ±10% |
eturn Loss |
≥55dB |
Polarization Dependent Loss |
≤0.2dB |
Max Optical Input Power |
200mW |
Humidity |
95%RH |
Operating Temp Range |
-40~80°C |
Features:
Fiber Attenuator Application:
Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single- mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications
Packaging:
This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as de- fault .Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty . Packing can be customized.